Detuo manufacture the mini concrete mixer, plate compactor, tamping rammer,power tools since year 2008.To use a tamping rammer (also known as a jumping jack compactor) effectively and safely, follow these steps:

1. Familiarize Yourself with the Equipment: Read and understand the user manual provided by the manufacturer. Pay attention to safety precautions and operational instructions.

2. Wear Safety Gear: Before operating the tamping rammer, put on appropriate personal protective equipment, including safety glasses, ear protection, a dust mask, steel-toed boots, and gloves.

3. Prepare the Work Area: Clear the area of any obstructions, debris, or loose materials. Ensure the ground is properly compacted or leveled before using the tamping rammer.

4. Inspect the Detuo Tamping Rammer: Check the fuel level and oil level of the rammer. Ensure everything is in proper working condition, including the engine, handles, foot, and any safety features.

5. Start the Tamping Rammer: If necessary, follow the specific instructions for starting the engine provided by the manufacturer. Typically, you need to prime the engine, set the choke if applicable, hold the throttle or grip, and pull the starter cord.

6. Position Yourself Correctly: Stand behind the tamping rammer, maintaining a firm and stable stance. Hold onto the handles firmly with both hands, ensuring you have a good grip.

7. Adjust the Settings: Adjust the controls and settings for the tamping rammer as needed, such as engine speed or compaction force. Refer to the user manual for guidance on adjusting these settings.

8. Lower the Foot: Lower the foot of the tamping rammer onto the ground at the desired starting point. The foot should be in contact with the surface to be compacted.

9. Start Compacting: Gently pull the throttle or grip to engage the engine and activate the foot's compaction mechanism. Allow the tamping rammer to make contact with the ground and perform its jumping action.

10. Move in Straight Lines: Move the tamping rammer forward in straight lines, overlapping each pass by a few inches. Maintain a slow and controlled pace to allow the rammer's jumping action to effectively compact the soil or surface.